DIY folding fisherman's chair without armrests. How to make a feeder chair for fishing with your own hands. Industrial options for feeder fishing chairs

The main indicators that you need to pay attention to first:

• Strength. How much weight can it bear?
• Weight. Fishermen often have to get to their fishing spot on foot, and they always want to get rid of extra pounds of carrying weight.
• Sustainability. There are no perfectly flat surfaces when fishing, so the chair must maintain a vertical position in all situations and not fall along with the fisherman during any movement.
• Compactness. An important factor when transporting and carrying.
• Stay on the surface. Some designs, for example, with tubular legs, are pressed under the weight of the fisherman into a soft surface, such as sand, black soil, etc. For such cases, legs with a larger area of ​​​​contact with the ground are more suitable.

Convenience and comfort

According to fishermen, the best models are those that have in their arsenal a sufficient number of options for comfortable fishing, without any excesses.

The seat must have a backrest and holders. This option, as many believe, is the most optimal in terms of price and quality.

Let's consider the simplest option with a wooden back with four legs. To do this you will need:

• birch bars, which you can also make yourself;
• furniture board with a thickness of 1.8 cm;
• PVA glue and several screws;
• cap type nuts (d=5 mm);
• wooden dowels measuring 8x50 mm;
• 4 washers and 4 bolts;
• steel rod;
• seat support bars;
• back;
• fabric for seat and back;
• transverse ligaments.

Obviously, you can come up with a huge number of different variations of one chair, but to understand, you should consider the main types of furniture for fishing:

• Sun lounger. It's no secret that while fishing you get tired of sitting and want to lie down for a while, since sitting for a long time without a backrest is a big burden.

Important! There is a prejudice among inexperienced fishermen that the necessary efforts can only be made while standing. In fact, it is necessary to stand only if you are going for catfish or pike - to catch the same crucian carp, you can fish while lying down.

A comfortable fishing chair is, so to speak, a fisherman’s “workplace.” This means it should be comfortable.

Such a seat must have the following characteristics:

• light weight;
• compactness;
• sustainability;
• Possibility of adjusting the back and legs.

Thus, the main requirement is convenience and safety of use. To catch a big trophy, you often have to wait a long time.

Of course, doing this in a chair is much more convenient than standing. The same can be said about tying leashes, attaching feeders and fishing for the catch.

If the legs and back are adjustable, this will allow you to take a comfortable position and relieve your back. If you are going fishing on foot, the chair should be lightweight and equipped with a wide shoulder strap.

You can also easily make a homemade body kit for the feeder chair. To do this, you will need plastic plumbing fittings, pipe fasteners, and the aluminum pipes themselves.

Important accessories for feeder fishing should be at hand: a bucket with bags of dry and home-prepared bait, a box with bait. Not all fishermen are willing to lay out their catch right on the ice at their feet.

Some people, having removed the fish from the hook, immediately put it in a small plastic container or bag. To do this, the container must also be placed near the seat itself, so that the necessary manipulations with the catch can be performed without getting up.

A seat with a folding attachment table and a body kit necessary for winter fishing makes any handling of fish, hook and bait convenient, minimizes time and effort for all auxiliary procedures, making it possible to concentrate only on the main thing - fishing. Even if something suddenly appears in the fisherman’s field of vision, he will not ignore it, while continuing to fish.

A more reliable option for storing individual accessories is in special pockets made in the seat upholstery. This is guaranteed to prevent a sudden gust of wind from blowing away the bait or bait.

In addition, putting all the necessary accessories into the seat pockets and removing all the necessary accessories from there is much more convenient than constantly bending low when everything is laid out on the ice. You can choose any other design of niches and pockets for accessories in the chair, taking into account your individual priorities.

Even when the chair is ready, it is comfortable and the fisherman has sat in it enough at home, it is too early to take it fishing. For greater convenience, you need a specific kit for winter fishing.

These are additional accessories to the seat in the form of pockets for bait and bait, stands for the rod, a folding table for a thermos with tea and manipulations with the feeder and hooks. Only when everything is complete will the chair begin to “work off” the costs of its construction.

Prices for feeder chair body kit elements on sale are steep. Buying the entire body kit as a set will be no cheaper than the chair itself.

Types of body kit include:

• rod stands;
• folding table with drawers for baits and groundbaits;
• special hanging bucket for bait mixture;
• pocket for thermos.

All these elements are not so complex that a person who made a chair with his own hands would buy them in a store. With such equipment, the fishing process is simplified.

Become a mechanic

Seeing the cost of branded body kit elements, the fisherman will only strengthen his desire to continue his plumbing activities. To make your own fishing seat kit, you will need the following materials:

• aluminum tube Ф25 mm, length 300 cm;
• fitting elements with which plastic pipes will be attached to the frame of the chair - 6 pcs.;
• pen for drilling plastic and wood Ф 26 mm;
• fastening elements for pipe blanks;
• drive-in nuts for furniture fittings may be useful;
• M8 threaded bolts;
• lightweight but durable plastic box;
• plastic clips for fixing pipe blanks.

In general, you can come up with countless different options for chairs, these can be chair-like seats with a back, poufs, drawers, lounge chairs, and so on.

Let's look at the main types of fishing chairs that can be most useful.

This option is a little more difficult to make, but here's what it looks like

If you've ever assembled a cabinet with pull-out shelves, then you already know how to assemble this chair. As mentioned above, the only difference is that you will also need to upholster the upper part with something soft, so as not to sit through everything in the world.

It’s not difficult to choose a quality model in a fishing store. The seller will tell you about all the advantages and disadvantages of a particular model.

Nautilus Simple NC 9002. A compact and lightweight chair that is perfect for both fishing enthusiasts and those who relax in nature.

Advantages:

• the seat is perfectly taut;
• does not sag anywhere;
• holds the body well;
• soft filler is evenly distributed over the entire area;
• The wide back provides excellent back support.

The only negative is that only one position is available. The angle of inclination cannot be changed.

Characteristics:

• The upholstery is made of durable and wear-resistant material.
• Another advantage is easy cleaning, which is important for furniture that is used outdoors.
• The frame is good old steel (strong and very reliable).
• The build quality is excellent. It feels like a glove, nothing wobbles anywhere.
• Powder painting.
• The legs are height adjustable. Therefore, the product can be installed on uneven surfaces. The legs are made of aluminum to avoid corrosion.

When folded, it takes up very little space in the car. And the relatively light weight of 4.2 kg will allow you to easily carry it across a pond.

Price 4300 rubles.

FK-5 Carp Cuzo. The design is foldable. It is very convenient for carrying and transporting to a place of recreation or fishing. At the same time, the weight is about 8.5 kg. When carrying, the weight is not felt much.

Peculiarities:

• Structurally, it has a reinforced metal base. The maximum permissible load is up to 150 kg.
• The product unfolds and installs very quickly, which will also be a definite advantage during its operation. Speed ​​to the surface is achieved due to folding legs. There is no possibility of fixing the legs on the product itself, but this is not important.

Characteristics:

width 55 cm, depth 55 cm.

First way

A three-legged chair is less stable. However, its manufacture will require fewer materials:

• three wood screws;
• one bolt with a swivel loop (with washer and nut);
• 3 wooden pins (each length is 60 cm, diameter 4 cm);
• seat fabric (leather);
• one standard bolt (with washer and nut);
• three separate washers.

Tools:

• drill or screwdriver;
• two drills (one 6 mm, the second 1 mm).

There are many options for making your own fishing chair. As a rule, most fishermen opt for a simple model that has minimal weight and takes up a minimum of free space.

.

Chair-lounger

• A folding chair, as a rule, consists of 2 planes connected by hinges, as well as a device that regulates the angle of the backrest. Basically, the seat and backrest are made in the form of a frame, made of light metal, on which fabric is stretched, according to the principle of the well-known folding bed. By the way, if you try, you can make a fishing chair from an old folding bed at a minimum cost.
• Box chair. The simplest design consists of a cabinet of a certain height (about 40 cm), on top of which a soft seat is mounted. It also serves as the top cover of the cabinet and has the ability to open. Fishing accessories and fish are stored inside the cabinet.

It's time to move from description to practice in making the 3 types of chairs described above.

General approaches

All types of chairs, regardless of design, consist of similar components. Therefore, some manufacturing stages will be similar.

All the main parts must be listed and a list is made based on them. For example:

• Legs - 2 pcs.
• Back with legs.
• High chair.
• 4 bolts, etc.

Drawing a drawing

A drawing or drawing involves drawing the product from three sides - front, side and top. Side and top views are called projections.

Calculations

Folding fishing chair on four legs

To make it, you need to take a couple of wooden beams and drill one hole in the center in each of them. After this, the beams are connected in an “X” shape using bolts.

Fishing chair on three legs

First of all, a homemade fishing chair should be light - excessive weight makes it very difficult to carry it to the right place. At the same time, the chair must be durable to withstand the weight of the fisherman.

The next important point is the stability of the chair, since it is not always installed on a flat surface, and a person can fall under a sudden load or even a simple turn. Well, the last but not least important characteristic is the comfort of the fishing chair.

In some cases, a fisherman has to sit motionless for hours; in such a situation, a comfortable seat and backrest are simply necessary not only for the possibility of enjoying fishing, but also for human health.

There are many options for making your own fishing chair. As a rule, most fishermen opt for a simple model that has minimal weight and takes up a minimum of free space.

Many people believe that a chair is necessary to facilitate the fishing process, making it more comfortable. A higher level of comfort requires a more serious design, which is unlikely to be light and will take up a lot of space.

In some cases, this is not of fundamental importance if there is something to transport fishing gear and other accessories.

It's time to move from description to practice in making the 3 types of chairs described above.

First of all, what needs to be done is to decide on the design of the future chair and create a drawing of it, according to the drawn sketch. In this case, the drawing must indicate its main dimensions, as well as the dimensions of the component parts, separately.

If you look at the drawing, you can determine the complete availability of all the materials that are necessary for the manufacture of the structure.

Everyone went to school and remembers their descriptive geometry lessons very well. Therefore, there should not be any special problems in drawing such a simple drawing. If something doesn’t work out, you can not draw a real drawing, but limit yourself to ordinary drawings of parts by hand, indicating their real dimensions.

A drawing or drawing involves drawing the product from three sides - front, side and top. Side and top views are called projections.

The main image is considered to be the front view, while the side view is located to the right of the main image, and the top view is located below the main image. At the same time, the side view and top view should not extend beyond the dimensions of the front view.

At the same time, it should be noted that the time of graph paper and Whatman paper is gone. Nowadays, they have been replaced by computers with special programs installed on them to automate the design process, including the stage of creating working drawings.

Unfortunately, learning how to create drawings on a computer requires experience. Therefore, you shouldn’t bother with such a simple design, since you can get by with a regular hand drawing.

In order not to get confused in the drawings, it is necessary to indicate the actual dimensions of all parts.

After all the dimensions have been determined and all the materials have been prepared, you can proceed to the main stage - putting the idea into practice. To do this, you need to go to a workshop, which can be a balcony, barn or garage, where all the tools and materials are stored.

To make it, you need to take a couple of wooden beams and drill one hole in the center in each of them. After this, the beams are connected in an “X” shape using bolts.

The same is done with another pair of bars. Finally, the two X's are joined together and the chair is then upholstered in faux leather.

To make it last a long time, it should be coated with two layers of water-repellent varnish. That's it, the chair is ready for use.

But this will not be a folding chair, which will not take up very much useful space. Folding chairs are made using the same scheme, but it is better to use metal.

There are chairs of this type. Unfortunately, they are used very rarely, since this design is not very stable.

Making such a chair can take up much more useful time and require more effort.

You can assemble various models with your own hands using various materials. But their main characteristics remain unchanged. Among the qualities that chairs must have are the following:

• Sustainability. The chair must be stable regardless of the topography of the coastal strip.

• Strength. The design must withstand the weight of the fisherman, and not break after the first use.

• Small size and weight. Stowing a bulky and heavy chair even in a personal car can be problematic. And in cases where a certain distance needs to be walked, any person strives to lighten his burden. And a heavy or large chair is unacceptable in such a situation.

Since you plan to assemble a fishing chair with your own hands, its design should be simple. Therefore, it is better to give preference to simple schemes that everyone can assemble.

Similar to the previous option, you can make your own folding fishing chair with a backrest. To do this, you will need to slightly change the design. For this you will need the following materials:

• Wooden supports (2 pcs.) 91 cm long.

• Wooden supports (2 pcs.) 55 cm long.

• Six boards of different sizes for the seat (40x7, 39x4, 36.5x4, 36.5x4, 31x4, 30x4).
• Wooden back (40x0.7 cm).

• Crossbars for connecting bars (1 piece measuring 39x5 cm and 2 pieces measuring 32x3 cm).

They begin work by preparing the supports. Holes for bolts are made along their outer part. On the inside, grooves are made along the slats, 1.1 cm long and deep. The supports are connected by crossbars. The joints are coated with glue.

To make it more comfortable to sit on a chair, a bevel is made above the bunch of long supports. The boards on the seat are connected to the bars using dowels and screws.

Why does a fisherman need a chair?

In order to answer this question, you need to ask yourself, how long can a person survive standing or squatting? The answer is obvious, not for long. Even if someone prefers a more active type of fishing, such as spinning fishing from the shore or from a boat, then on the shore in any case you will want to sit down and relax.

Let's celebrate! Sitting on bare ground, stumps, fallen trees or even on a plastic mat is unsafe for your health, as there is always a high risk of catching a cold. Fishing should be fun and not cause subsequent health problems.

Here are some reviews from fishermen about folding fishing chairs:

• Advantages: can withstand a lot of weight, easily folds, easy to carry, anatomically comfortable. Disadvantages: none.
• Advantages: practical; comfortable; qualitative; price. Disadvantages: no backrest.
• Pros: convenient. Disadvantages: none.
• Pros: Inexpensive and durable. Disadvantages: none.
• Advantages: compact and convenient. Disadvantages: none.

Let's celebrate! A fishing chair is a very necessary attribute of a fisherman, like a fish tank or a fishing rod. With it, fishing turns into a comfortable and complete rest for the soul.

Manufacturing algorithm

• Folding beds consist of two planes, which are connected by two hinges and are equipped with a fabric seat. For this reason, these types of chairs are the easiest to assemble.

Important! You can make it entirely out of wood, but it requires a little more effort.

• Drawer with pull-out elements. It is something similar to a home cabinet, from which you can pull out a shelf. There is only one difference between these pieces of furniture - a backrest will be attached to the top of the fishing chair.

Important! A variety of materials can be used. Wood, leather, fabric and other materials are suitable for our business.

It is very easy to make a stool if you follow the diagram below:

1. Cut the plastic pipe into 8 pieces. 4 of them should be 50 cm long, and the remaining 4 should be 35 cm long.
2. Cut two pieces from a piece of tarpaulin. One will serve as a seat, the other as a jumper to stabilize the stool. Determine the width and length of the material yourself based on your needs.
3. Take the long tubes and connect them in twos crosswise with bolts.
4. At the top and bottom, use plastic corners to attach the long pieces of pipe to the short ones. The frame of the folding stool for summer fishing is ready.
5. Take a piece of tarpaulin folded in half and cover the top of the structure, which will serve as a seat.
6. Also fold a thin strip of fabric in half and sew it to the lower supports so that it serves as a limiter.
7. Adjust the tension of the bolts so that the chair folds and unfolds easily.

A stool made in this way is easy to take with you outdoors. Well, if you want to make a chair-chair for comfortable fishing, then attach a metal frame to the legs. By the way, such frames can also be used instead of pipes. Homemade chair with back

If you have the right equipment, the only thing left for an ice fisherman to do is set up his workplace well. All elements of equipment used for fishing should be located literally at arm's length from a seated person. This will save him from having to get up often, exposing himself to the cold wind and being distracted from the process of fishing.

The main element of the arrangement is the feeder chair. After all, winter fishing is mainly a passive activity - a person has to sit in one position for a long time. At the same time, the load on the back increases, especially on its lumbar region.

Now let's move from theory directly to practice - consider the procedure for making the four types of chairs described above.

Take two wooden beams, drill holes in them in the center, and connect them with a bolt so that you get some kind of wooden scissors. Then do the same with the other two legs. After this, connect these two pairs of “scissors” together as shown in the figure.

The difference here is that the seat is attached to only one side and slides along the other.

There is another version of such a chair - a tripod chair. This is a more exotic option, in which the seat resembles a saddle from a motorcycle or bicycle.

However, such a chair is uncomfortable and fragile, so it is mainly liked by young people.

Firstly, you will need a welding machine, which not everyone can handle. Many people argue that aluminum is not suitable because it is too soft.

.

The main materials for making a fishing chair are wood, plywood and chipboard. The use of metal is limited by the availability of special tools.

Firstly, you will need a welding machine, which not everyone can handle. Many people argue that aluminum is not suitable because it is too soft.

This statement is wrong. Many people still remember the Soviet folding bed, on which many rested at home or in the country.

Its frame is made of aluminum. Despite this, the folding bed served for years.

Therefore, anyone who has the opportunity to use an aluminum or duralumin pipe with a diameter of about 2 centimeters can safely use it. At the same time, the result will be a lightweight and mobile structure, which is also resistant to atmospheric conditions.

As for other materials, they will have to be protected from moisture.

You will also need durable fabric or artificial leather for upholstery. For moving joints you will have to stock up on bolts, washers and nuts, and possibly other parts. It all depends on personal preferences, as well as the nature of the design.

The most common options for chairs of this type are options with and without backrest.

1. A stool without a back is simpler to make and less expensive in terms of material, however, the first option is much more convenient to use. The back of the chair can be made of wood, that is, the product will be of one-piece construction, or the seat and back are made of durable fabric that is stretched over the base frame.
2. You can also divide chairs according to the type of legs - they can be straight, crossed or solid. The material for the chair can be metal, plastic or wood. Making metal or plastic chairs will require special tools and skills, so making them yourself can be quite difficult.
3. The option with a wooden chair is the simplest, thanks to the wide range of materials, their affordable price and the ease of use of wood.

Equipment

Materials for their manufacture

• plastic;
• metal;
• wooden.

Making a fishing chair with your own hands is not so difficult, following the rules and advice of experts. Manufacturing can be done in several ways depending on the type of chair.

Tripod design

This design is the most common and easiest to manufacture.

To do this you will need:

• wooden slats - 3 pcs. Section 2.5 by 2.5 cm, length 43 cm;
• a piece of strong fabric or tarpaulin;
• a metal plate that will serve as a connection element;
• 3 bolts, nuts and washers.

Manufacturing stages:

1. In the wooden slats, holes are drilled in their center to the size of the bolts for fastening them;
2. Three holes are made in the metal strip, also matching the diameter of the bolts;
3. The plate is bent into a hexagonal shape and screws are inserted. When bending, its ends are overlapped. The bend must be made so that the heads of the inserted bolts inside are in contact with each other;
4. After making the frame, the seat itself is sewn. A triangular segment is cut out and its edges are processed. Special pockets are sewn along the edges into which slats are inserted. For durability, the seat is made of several layers of fabric;
5. Having completed the assembly process, the product must be coated with varnish or other finishing materials for long-term use.

Wooden folding fishing chair

A chair made according to this design is in demand and is more stable and durable, unlike a tripod. Before making a chair, you need to prepare its necessary elements.

• The process begins with making the legs. These are square wooden blocks, 36 cm long. Their cross-section is 2.5 by 2.5 cm. Quantity: 4 pcs.;
• Next, 2 bars are prepared for the seat, their cross-section is the same as that of the legs, 29.5 cm long;
• To fasten the seat, slats with a section of 3 by 1 cm and a length of 30 cm are used;
• To ensure the transverse rigidity of the chair, a block 19.5 cm long, with a cross-section of 4 by 2.5 cm, is used. It will be installed at the junction of the legs;
• For strength, a rail will be attached to the lower part of the legs on one side, length 30 cm, section 2.5 by 1 cm;
• Having prepared the necessary parts, you can proceed to their assembly.

Build process

1. Holes are drilled in a short block, the radius of which depends on the size of the bolts used for fastening;
2. Transverse holes for the washer and nut are made across these holes. They can be made either blind or through;
3. Let's move on to assembling the seat. 1.5 cm is removed from the end of the bars and the first rail is attached. All subsequent ones are attached in 1 cm increments;
4. Next, install the bolts connecting the legs to each other and to the seat;
5. For strength, an auxiliary rail is attached to one side of the pair of legs;
6. Upon completion of assembly, the chair is placed on a flat surface and bevels are marked on the lower parts of the legs, which are then sawed off;
7. After finishing the process, cover the chair with varnish or other finishing material.

To summarize, a fishing chair is essential for a comfortable and healthy fishing experience. When purchasing it, you need to take into account its main characteristics - whether it folds or not, the strength of the legs and the entire material as a whole, and whether it has a back.

You can not only purchase a chair, but also make it yourself. If you follow all the recommendations and dimensions, the resulting product will be no worse than purchased.

Before deciding how to make a fishing chair with your own hands, you need to decide what type it should be.

The simplest option is a stool. These are the lightest and most compact models that are easy to carry. And their manufacturing technology is simpler than other options.

A fishing chair with a back will be more comfortable. Assembling it with your own hands is a little more difficult than the previous version. However, it will allow you to relax your back when sitting for a long time, which is also important for any fisherman.

Self-assembled folding fishing chairs in the shape of a stool are very convenient to use. The base in them is made of plastic pipes. A piece of dense, durable fabric is used as a seat.

The first step is to prepare the blanks. 8 parts are cut from a plastic pipe. The pieces that will serve as a support should be about 50-60 cm in length. You will need 4 pieces of such blanks. Another 4 pieces will be required, 35-40 cm long. Two of them will go to the lower jumpers between the legs. They will allow you to obtain a more reliable and stable structure. And two will organize the seat.

Long pieces are connected in pairs. Each pair is fastened with a bolt twisted in the middle. You should get two cross-shaped parts. They are connected to each other at the edges by short elements. It should be a sliding structure. The ease of folding (unfolding) is regulated by the tension of the bolts.

The upper short jumpers are connected to each other with a piece of fabric (for example, tarpaulin). It should be a seat. A narrower strip of fabric is stretched between the lower pair of jumpers. It will act as a limiter that will prevent the chair from folding.

You can also make your own folding fishing chairs with metal legs. Their design is similar to the previous version. The only difference is the use of aluminum (or steel) pipes. It is worth noting that this option will have more weight than one made from a plastic pipe. But at the same time, its reliability will be higher.

The manufacturing process itself is similar. Blanks can be taken in the same sizes. The only difference is the way the individual elements are attached to each other. Metal will be a little more difficult to work with. If you have the tools, most connections can be made welded. Only at the intersection of the legs must there be bolts. Otherwise the chair will not fold.

This is another option that will help you assemble a folding fishing chair with your own hands. Drawings prepared in advance will allow you to determine the dimensions of the structure and the required amount of materials.

4 blanks are prepared from wooden blocks, which will serve as supports. The two parts are connected to each other by a bolt twisted in the middle of the legs. You should end up with two blanks that are somewhat reminiscent of scissors. The blanks are connected to each other using wooden planks. They will serve as a seat. They can be replaced with fabric.

Jumpers are made from below in the form of wooden crossbars. They will prevent the chair from falling apart.

Video material

Well, now you can imagine how to make a fishing chair with your own hands, because it is not particularly difficult. The most important thing is to avoid mistakes in the first two stages. Happy fishing!

As a rule, wood and chipboard are the most popular, since making anything from metal requires a welding machine and good tools for carving steel, and not everyone has them.

Why steel - because this is the ideal option - it is strong, durable, and if you cover it with stainless varnish, then it won’t even need water.

Aluminum will bend after the first fishing, and will continue to wrinkle from any push or blow. From this point of view, wood is optimal because it is easy to obtain and easy to work with.

To connect the moving parts, we will need steel bolts, nuts and studs, possibly pins, but this is at our discretion. You will also need fabric or artificial leather to make the chair soft.

Having decided to make a fishing chair on your own, the first thing a person thinks about is the necessary materials. So, to make a fishing chair with approximate dimensions of 150 centimeters in height and about half a meter in width you will need:

• aluminum pipes with a diameter of 2-2.5 cm, wall thickness 2 mm and lengths: for legs - 4x55cm, for seat frame - 4x55, for back parts - 2x70, 1x30;
• fastenings that will be needed to connect the pipes to each other;
• rubber attachments on the ends of the legs so that they do not slip on wet stones;
• two pieces of fabric with foam padding, which will cover the seat and back of the chair (preferably waterproof, so that you can sit comfortably even if water gets in). Fabric dimensions: 75x40 – seat, 65x40 – back;
• paint and primer to cover the pipes of the future chair (optional).

Based on the fact that the option with wooden materials is the simplest and most budget-friendly, we will choose it. The basis of the chair will be wooden blocks, the dimensions of which will depend on the size of the particular chair. They will serve as legs and a supporting part for the back.

The materials for the seat and the most supporting part for the person’s back can be wooden slats or thick fabric, such as tarpaulin. You need to choose a quality tree, it is advisable to opt for hard wood (birch, oak and others), since the service life of the product will depend on this.

To connect the parts into a single structure, you will need fasteners, in our case these are bolts, nuts and washers for movable joints and wood screws for fixed ones.

You can assemble a fishing chair with your own hands using various materials. The use of available raw materials will significantly reduce the cost of all work.

You can often find wooden chairs. Wooden blocks of various sizes are used both for making the frame and for preparing the seat, back and other elements.

Metal pipes are widely used as supports. They can be combined with wooden or fabric seats. Pieces of tarpaulin, leather and other durable fabrics are used to cut out the seat. There are also plastic elements. This is a durable yet lightweight material, ideal for making fishing chairs.

The structures are assembled with your own hands using fasteners. The base is assembled, as a rule, using self-tapping screws, bolts, screws, and staples.

Manufacturing algorithm

If you don’t like the color of the metal, you can paint all the pipes a different color. If this is not necessary, then we begin the actual production of the fishing chair.

The first step is to prepare 4 pipes for the frame and 4 fasteners. We install two fasteners on two pipes at a distance of 6 centimeters from the beginning and end.

On one of the two pipes, we pre-install one more fastener next to each of the already fixed ones - they will be needed when making the back of the chair (each fastener is located at a distance of 9 centimeters from the beginning of the pipe).

We connect the pipes with fasteners with two others of the same length, thereby obtaining a rectangular metal frame.

The next step is to connect two 70 cm pipes with another 30 cm pipe so that the long pipes remain parallel to each other. That is, at the end of each pipe it is necessary to fix one fastener so that the short pipe can be inserted into the fastening perpendicular to the long one. Thus we get a U-shaped structure.

Then, into the fastenings that were fixed on the pipe for the backrest, we insert the part, the manufacture of which is described above, and tighten the fastenings.

Next, we install one more fastener on the four free ends of the pipes, and then insert one leg into each of them, which will be freely adjustable thanks to fastenings with a tightening principle. We install rubber nozzles at the end of each leg.

The final stage is stretching the fabric. We take the first piece to cover the seat.

The best option is to make several holes on each of the short sides so that when stretching, tie the ends of the fabric with an elastic band, which will allow the fabric to bend under the weight of the fisherman. We do the same with a piece of fabric for the back, only here the holes need to be made on the long sides.

We fasten it in the same way.

We got a very comfortable, light and reliable do-it-yourself fishing chair with dimensions in centimeters of 55x55x120. A big plus is the ability to disassemble the structure if necessary. The approximate weight of such a feeder chair is not much different from the weight of a “branded” chair - about 8-9 kilograms.

With a little effort, we get an excellent fishing chair, which is much cheaper than those that can be found in the store, and most importantly, made with our own hands.

General rules

All the structures we have presented are somewhat similar to each other, so up to a certain stage the algorithms for their assembly will be the same. So, the first thing to do is to carry out calculations and draw a drawing (professional engineers call this stage design).

Start with a sketch - draw on a piece of paper what your chair should look like. For now, don’t pay attention to the dimensions, structure, design, and so on. Focus only on its external form.

Then select the parts from which it will be made.

List them in a column on a piece of paper, like this:

• Legs - 2 pcs.
• Back with legs
• toilet seat
• 4 bolts

And so on. Then, when you decide what parts your structure will consist of and approximately how many bolts will be needed, mark on the sketch the places where these fasteners should presumably be located (again, approximately!), and you can proceed to the drawing.

How to make a drawing?

At school, everyone had lessons in engineering graphics and descriptive geometry, so you most likely know what projections are, and also remember how to draw drawings. If you forgot everything or simply slept through all the lessons, there is nothing difficult here.

A drawing is an image of your product from three sides - front, side and top. These views are called projections. In the drawing, the front view is located in the upper left part, below it is the top view, and to the right of the front view is the side view.

How to catch more fish? I have been active fishing for quite some time and have found many ways to improve the bite. And here are the most effective:
Bite activator.

Attracts fish to cold, warm water with the help of pheromones included in the composition and stimulates its appetite. It’s a pity that Rosprirodnadzor wants to ban its sale.

More sensitive gear. Reviews and instructions for other types of gear can be found on the pages of my website.

Lures using pheromones.
You can get the rest of the secrets of successful fishing for free by reading my other materials on the site.

In this case, the front view must be drawn at the same level as the side view and the top view, so the drawing will be much more accurate. This is called axonometric connections.

Now about the technical side of the issue: if you like to tinker with whatman paper, graph paper, pencils and erasers, then for God’s sake, but today the life of engineers has been greatly simplified by computer modeling, and in particular by programs such as AutoCAD and compass. Download them from the Internet and go ahead.

What to do after the drawing? Calculations.

When you have drawn a high-quality, understandable drawing, you can start making calculations. The drawing should be clear so that you don’t get confused in it, because then your chair will turn out crooked, and the work will have to be redone from the beginning.

To cut the necessary parts from the workpiece, you will need to accurately determine their dimensions; a drawing will help us do this. If you drew on paper, then simply measure the lengths of the parts with a ruler, and then increase all the dimensions several times, and you will get the dimensions of a real chair. If you worked on a computer, use the built-in length measurement function.

That's it, the theoretical part ends here, and you go to the workshop to make parts.

Chair-lounger

This option is the most difficult. Because there are more connections and mechanisms here than in the previous ones.

It turns into a bed by moving the shutter along special depressions on the rear legs. To make such a chair, move the centers of the holes in the scissors closer to the edge, after cutting out depressions (grooves) on them.

Next, fabricate the bolt carrier (that's what fits into the slots) and bolt it to the back. That's it, all that remains is to work on the seat.

It doesn’t have to be wooden; you can make it fabric or leather.

Making things yourself is not only cheap, but also enjoyable. However, if you still do not have experience in this matter, then it is better to go to the store and buy one, because if you make a bad chair, it may fall apart right under you, and you risk getting injured, especially if you are already quite old.

If you know someone who knows carpentry, ask them for advice or offer to evaluate your work. Chances are, if the chair has any flaws, they will notice it right away, and you can send the chair back for revision in a timely manner.

Any fishing enthusiast will agree that, no matter how exciting fishing is, staying in one position for a long time causes discomfort. Of course, you can simply sit on the grass or snags, but in this position your legs will quickly become numb and your back will begin to ache. To have everything you need at hand and at the same time relax, you can make a feeder chair with your own hands. It's not as difficult as it might seem. The main advantage is that you can save money.

To make such a seat for feeder fishing, you will need materials that are probably available in any garage or shed. You may have to buy a few things, but the costs will not be as high as if you wanted to buy a folding chair in a store.

A comfortable fishing chair is, so to speak, a fisherman’s “workplace.” This means it should be comfortable.

Such a seat must have the following characteristics:

• light weight;
• compactness;
• sustainability;
• Possibility of adjusting the back and legs.

Thus, the main requirement is convenience and safety of use. To catch a big trophy, you often have to wait a long time. Of course, doing this in a chair is much more convenient than standing. The same can be said about tying leashes, attaching feeders and fishing for the catch. If the legs and back are adjustable, this will allow you to take a comfortable position and relieve your back. If you are going fishing on foot, the chair should be lightweight and equipped with a wide shoulder strap.

The simplest option

How to make such a fishing seat with your own hands? If you're happy with a simple design, here's how to make one:

1. Decide on the sizes that are right for you.
2. Make the corresponding drawings.
3. Take two closed rectangular metal pipes.
4. Connect them crosswise with a bolt and nut.
5. Sew a seat from a wide double strip of tarpaulin on top.
6. Make a limiter at the bottom from a thin double strip of fabric.
7. Attach another one to one of the arcs, which will act as a backrest.

This is the easiest option for making a folding bed. Although it is important to take into account that its back when unfolded will be in one position.

And here, for example, is a hybrid of a platform and a broken car seat:

Photo 1 Photo 2 Photo 3 Photo 4
Photo 5 Photo 6 Photo 7

Additional accessories

Some store models have armrests. Fishermen differ regarding their necessity, as such additions may restrict movement. In short, if you want to make the seat yourself, take this point into account.

Of course, every fisherman has many things that he needs to take with him. Therefore, a feature of feeder chairs is the presence of attachments. This is really convenient, since everything you need will always be at hand. You won’t have to bend down to the ground to pick up jars and bags, because they are located on a special stand. The harness can also be used to fix the rod in the most convenient position.

DIY body kit

Body kit for fishing chair

You can also easily make a homemade body kit for the feeder chair. To do this, you will need plastic plumbing fittings, pipe fasteners, and the aluminum pipes themselves.

Design of the base for the drawer To attach to the legs, the fittings need to be drilled to 26 mm. At the bottom of the drawer, 4 latches are screwed under the pipe.
Collapsible frame assembly Rod butt holder Homemade body kit for a chair

There are many design options, and you can choose the one that is most convenient for you. The tubes are connected with fittings (angles or tees) and attached to the legs of the chair. The body kit made in this way is foldable, so you can simply take its parts with you and assemble it on site. The advantage of such homemade products is that they can be made to suit every taste. And you won’t have to spend a lot on purchasing store-bought products.

Many self-respecting fishermen made a fishing chair with their own hands. But not every one of them knows all the manufacturing nuances, as well as the types of devices. How to choose the right materials and the right option for yourself? How to avoid mistakes with the correct drawings when doing work on making chairs?

Today there are a large number of seating options; it would take a very long time to list them.

But the main types are still:

• sun lounger Very often, many fishermen lack a folding mechanism that would help them relax and lie down. This chair is used if you are not a professional, but just an amateur and catch ordinary crucian carp. This mechanism will not work for predatory fish. Many people have prejudices that for the feeder fishing method it is necessary to stand, and not sit, so that all efforts are put into catching fish;
• chair with backrest. This option is convenient and allows you to relax your back, which is ideal for retirees. Using this mechanism you can fish on a feeder. And then fishing turns into a favorite hobby;
• a chair that matches the fish box. Fishing is always accompanied by prey that needs to be stored somewhere. This chair allows you to combine 2 mechanisms in one;
• a chair resembling a cot. The simplest and most common option, represented by a folding mechanism. It is light in weight, which allows you to take it to any feeder hobby.

When choosing a chair, it is worth considering that feeder fishing methods cannot do without this device.

But, in order not to spend your finances on purchasing expensive seating, you can build them yourself.

To assemble a chair for full feeder fishing with your own hands, you should know the designs of the main types of chairs:

1. The folding bed, like a chair, has 2 main planes that are connected on a hinge. The drawing diagram is very simple, so it can be made from any material.
2. A chair with a back can be of 2 classifications: solid and folding. The first option will be stronger, and the second will be more mobile, but require a greater degree of care.
3. The lounge chair is the most complex of all the above designs. It can be of 3 types - prefabricated, solid and in the form of a clamshell. Monolithic will be the easiest to implement.
4. A chair with shelves is the most optimal option in terms of capacity. Relevant for fishing in the summer because you can put spare clothes in it for the night.

When choosing a design, you should count on your strengths, because if you set priorities incorrectly, you can waste time and not collect anything worthwhile. It is better to complete a simple design, and then move on to a more complex one.

Among the main materials for making a chair are:

1. Wood and chipboard. To make a chair from these materials, you do not need to use a welding machine or good carving tools. Here are the basic building supplies required to make your own folding fishing chair.
2. Steel. To use this material, you need a tool, and you should also take care of the protective coating. The advantages of steel are durability and strength.
3. You should not use aluminum, because any chair will bend after the first impact. Folding chairs made of plastic also will not last long and function properly.

Therefore, the best option is still wood. To connect the elements of a feeder fishing chair, you will need bolts, nuts and nails, and to add softness, leather or any other finishing material.

Procedure

To make a chair for feeder fishing, you should follow the following procedure:

1. Decide on a chair option for feeder fishing.
2. Make your own drawings with dimensions, as well as make diagrams of individual parts for better consideration. It is best to do this on drawing paper.
3. Make a list of materials for your homemade structure. You need to immediately count their number.
4. Assemble a homemade chair ready for fishing.

It must be remembered that an accurate calculation will allow you to assemble a homemade chair without any additions.

It is very important to pay attention to the dimensions, which should be measured both on the sheet and in real life using a construction ruler.

Fishing is one of the popular male pastimes. Have a nice time on the shore of a pond. Experienced fishermen understand that comfortable fishing requires a comfortable place to sit. Sitting on logs is uncomfortable, and dragging a bulky chair behind you is also not an option. The ideal solution to this issue would be a folding chair with a backrest, which is compact when folded, and when used will help not put strain on your back, which quickly gets tired from sitting for a long time.

The height of the chair can be 350 mm - 450 mm.

Store-bought options are not always suitable, since often these products are either not reliable or are very expensive. Therefore, the most rational solution is to make a folding chair for fishing with your own hands. A homemade chair will not only help you save money, but will also allow your imagination to run wild and make a good product from quality material. The advantages of such a chair are its compactness, stability, ease of transportation and simple manufacturing.

To make a folding chair, you can use any type of wood; birch will give it strength.

The most common options for chairs of this type are options with and without backrest.

1. A stool without a back is simpler to make and less expensive in terms of material, however, the first option is much more convenient to use. The back of the chair can be made of wood, that is, the product will be of one-piece construction, or the seat and back are made of durable fabric that is stretched over the base frame.
2. You can also divide chairs according to the type of legs - they can be straight, crossed or solid. The material for the chair can be metal, plastic or wood. Making metal or plastic chairs will require special tools and skills, so making them yourself can be quite difficult.
3. The option with a wooden chair is the simplest, thanks to the wide range of materials, their affordable price and the ease of use of wood.

At first glance, the drawing of this object rather resembles a Rubik's cube, and it is not at all clear how one can build something following it.

Remember that the middle bars are placed in the same way as the outer, wide ones.

Materials and tools

Based on the fact that the option with wooden materials is the simplest and most budget-friendly, we will choose it. The basis of the chair will be wooden blocks, the dimensions of which will depend on the size of the particular chair. They will serve as legs and a supporting part for the back.

When starting assembly, first of all it is necessary to place the axle bolts on the legs of the chair, and the axle should not be located in the middle of the legs, but closer to their top, otherwise the chair will be high and will not be particularly stable.

Without getting hung up on thoughts, let's move on to practical actions.

The materials for the seat and the most supporting part for the person’s back can be wooden slats or thick fabric, such as tarpaulin. You need to choose a quality tree, it is advisable to opt for hard wood (birch, oak and others), since the service life of the product will depend on this. To connect the parts into a single structure, you will need fasteners, in our case these are bolts, nuts and washers for movable joints and wood screws for fixed ones.

When assembling, do not forget that the heads of the nuts and bolts must be recessed flush.

A folding chair is a very useful household device.

Of the tools to perform this work, a standard carpenter’s set, which is at the disposal of almost every owner at home, is sufficient:

• drill;
• screwdriver or set of screwdrivers;
• hacksaw for wood and metal;
• wrenches, knife or scissors if you have to work with fabric;
• file and sandpaper for subsequent removal of surface defects.

A folding chair is an ideal option for lovers of fishing and outdoor recreation.

The described product is made without a handle, however, this gap can be easily eliminated by installing portable handles between the inner legs.

Without much difficulty, you can make such a chair with your own hands, even without being a carpenter.

Procedure

The process of making a chair is quite simple, and even a person without professional skills in this matter can handle it.

1. It is necessary to assemble the seat by attaching the transverse slats to the base bars.
2. Next comes the assembly of the frame, consisting of two bars, on top of which the back slats are mounted, in the middle - a crossbar for the seat (at the bottom the frame will serve as the front legs of the product).
3. The rear legs are equipped with two movable crossbars at the top and bottom.
4. The upper crossbar is connected to the back, the lower - to the main frame by bolted connections.
5. The seat is also attached to the middle frame using bolts. The result is a chair that, when lifted, folds into a compact structure that does not take up much space and is light in weight.
6. When working with fabrics or leather for the seat and back, a pre-measured and sewn cover is placed on the slats during the assembly process instead of the wooden cross pieces.

A folding chair is a very useful household device.

This piece of furniture is also indispensable in the kitchen and country house, since when folded it is quite compact and does not take up much space.

After the chair is ready, it is necessary to carry out the finishing work. First, you should get rid of all roughness and unnecessary protrusions. The bolts are sunk into the base of the wood, a file and sandpaper eliminate defects, varnish will add smoothness and emphasize the natural color of the wood, which in itself will be beautiful. However, if your imagination requires more beauty, you can use the skills of burning and wood carving, or give the product a more interesting shape at the design stage.

All you need is woodworking equipment, which is available in almost every garage or workshop of a carpentry enthusiast, basic woodworking skills and, most importantly, a desire to craft.

It can be used in the garage, where there is always not enough space, taken to nature and simply, if necessary, used in the apartment.

By asking yourself how to make a fishing chair with your own hands, you can get a wonderful product that will faithfully serve for a long time. At the same time, you can save a lot of money and let your imagination run wild, creating a truly unique original work.

If necessary, it is possible to change the height of the assembled chair; to do this, between the middle bars of the seat it is enough to insert another bar with a cross-section of approximately 20x20 mm.

To make a folding chair, you can use any type of wood; birch will give it strength, but pine will significantly lighten the structure, but its joints are not durable and can quickly become loose.

However, the finished chair suggests a slightly different thought - everything ingenious is simple.

VIDEO: DIY folding chair. Homemade folding chair

Every avid fisherman should have one on which he will sit by the pond and catch fish. The presence of such a piece of furniture will make fishing more comfortable and enjoyable.

Some people think that you can do without a fishing chair. But if you plan to fish for a long time, then you cannot do without it. Moreover, it is not at all necessary to purchase a ready-made chair in a store. It is quite easy and simple to make with your own hands from available materials.

As for the design features, fishing chairs are:

Whatever option you choose, the fishing chair should look like this:

• durable;
• sustainable;
• small in weight;
• compact and mobile;
• easy to manufacture;
• convenient to use.

But it is worth noting that folding models are considered the most popular among fishermen. They do not take up much space and are easy to carry from place to place. Most often, such products are made from wooden slats, metal pipes and plastic parts.

Attention: When making a chair, you should take into account your own weight and height.

Material selection

You can make a fishing chair from any materials. The most popular are:

Drawing

Before making a fishing chair, it is better to make a drawing of it. This will make it more convenient for you to cut materials and assemble the structure into a single whole. What is a drawing? This is an image of the future piece of furniture in three different projections: front, side and top. On this drawing it is necessary to indicate the number of parts, their exact dimensions and options for attaching individual elements to each other. The optimal sizes of a chair for fishing are:

• width from 270 to 500 mm;
• height from 270 to 470 mm.

Almost any fishing chair will consist of the following elements:

• two legs;
• backrests with legs;
• seats;
• bolts

Some models are equipped with armrests, footrests and other accessories. But these are already more complex and expensive to manufacture fishing chairs.

Reference: A competent drawing will allow you to calculate how much consumable material will be useful in the process of making a chair.

Tools

In the process of manufacturing and assembling a wooden fishing chair, you will need the following tools:

Materials that will be useful:

• lumber;
• bolts and nuts;
• paints and varnishes;
• tassels.

How to make a folding fishing boat out of wood?

Let's look at making the simplest design of a wooden fishing chair with 4 supports. To do this, we will need several wooden beams with a square section of 35 - 40 cm, from which the legs of the product will be made. The process of making a high chair will look like this::

In order for the chair to last as long as possible, it should be treated with antiseptics and coated with water-repellent varnish in two layers.

Attention: In order for a folding fishing chair to easily fold and unfold, it is necessary to correctly adjust the tension of the bolts.

Simple fishing design made from PVC plastic pipes

This version of the high chair can be assembled in a matter of hours according to the following scheme:

Photo

As a result, you will receive a product similar to the following photos:

Useful video

A detailed description of how to make a chair from wood is presented in the video:

An example of making a chair from PVC pipes is shown in the following video:

Conclusion

In conclusion, it is worth noting, no matter what option you choose, a fishing chair assembled by yourself will delight you not only with your own savings, but also with its practicality, convenience and attractive appearance. Each individual stool design is convenient in its own way and it will satisfy all the needs of its owners.

In contact with